Photo · [image needed]
Hard-wired control panels
Relay-based graphic panels with vandal-resistant LEDs and faceplates in stainless steel, anodized aluminum or Lexan.
Detention Locking Systems & Controls · Since 1945
Security electronics
See how Willo’s hardwired controls work and discuss intercom options for your facility.
Overview
Willo’s prison security systems put door controls and facility communication in the hands of the officers responsible for access and movement. Our hardwired, relay-based control panels use physical switches and graphic layouts to identify the doors and functions managed from each station. Intercom systems support communication with people at other locations in the facility.
We provide replacement control panels for existing facilities and electronics for new housing areas and new construction. Because Willo also manufactures detention locking equipment, our experience extends from the control station to the devices at the door. Repair, preventive maintenance and parts support help facilities care for those systems over time.
Product lineup
Photo · [image needed]
Relay-based graphic panels with vandal-resistant LEDs and faceplates in stainless steel, anodized aluminum or Lexan.
Photo · [image needed]
Intercom built into the control panel, with fully customized options on the same faceplate.
Photo · [image needed]
Hard-wired panels built around the doors they operate, the functions officers need and the equipment being retained.
Officers need to see which control operates each door. Willo builds custom graphic panels with labeled physical switches and engraved floor plans. The floor plan shows where the doors are, while each switch operates its assigned door or function. This gives officers a consistent place to find the controls for the area they manage.
Available panel features include Allen-Bradley switches, vandal-resistant LED lighting and low-voltage internal wiring. Faceplates are available in stainless steel, anodized aluminum and Lexan. The panel layout and component selections reflect the functions required at the control station.
Architects, engineers and facility teams can request security electronics specifications and drawings for project review. The applicable materials help clarify the proposed panel layout, the doors it will serve and the controls required at that location.
Officers often need to speak with someone at an entrance while controlling access. Willo offers intercom systems with options for placing intercom functions in the control panel faceplate. Officers can use selected communication functions from the same station where they operate the doors.
A panel can also include CCTV, HVAC, and lighting controls when officers need those functions at their station. Willo confirms the available features and connections for the project, including whether the new controls will work with equipment the facility plans to retain.
Willo provides intercom systems for new control-panel projects and existing facilities, including work that combines replacement and retained equipment.
When an officer operates a door control, the wiring carries that command to the locking device. Door-position sensors and other monitors send information back about the door or lock. The door and frame must also be in suitable condition for the equipment to operate as intended.
Willo’s product range includes Wedge swinging-door locking systems and sliding door devices. Our experience with those products helps us consider lock operation, control functions and status indication together. The signals available locally at the door and at the control panel depend on the selected lock and control configuration.
When a control-room light shows an unexpected door condition, the problem may be in the control panel, locking device, wiring, or another connected component. Willo offers troubleshooting to help identify the source. Technicians can review the equipment and determine which part of the system needs repair or replacement.
Willo’s relay-based controls let technicians inspect the physical components and service individual parts. When a switch or indicator does not work as expected, technicians can examine the relevant equipment and circuit in the panel. This helps them identify which components need adjustment, repair, or replacement.
The system uses commercially available parts that can provide replacement options. A worn switch or damaged indicator may need replacement while other panel components remain serviceable. The appropriate repair depends on the installed parts, the affected circuit, and the condition of the rest of the panel.
Our security electronics service and parts support helps facilities address those needs. Willo’s broader parts capabilities also include sourcing and fabricating hard-to-find parts for aging locking systems, with alternatives considered for discontinued or unsupported components. That support is valuable when an electronics project also involves older equipment at the door.
Willo’s factory-trained technicians provide repair and preventive maintenance for control panels, locking devices and other security electronics. Our service capabilities include on-site testing and attention to equipment already in operation. A facility can come to us with a specific fault, a recurring concern or a need for continuing maintenance.
Maintenance agreements can include monthly, quarterly or annual visits, with schedules tailored to the facility’s needs. The equipment and service requirements determine the work involved. These agreements give facilities an established way to obtain recurring support for the controls and locking systems their staff uses every day.
Aging panels, unreliable status lights, or changes to a housing area can prompt an electronics upgrade. Willo provides replacement hardwired control panels based on the doors they will operate, the functions officers need, and the equipment being retained. The work can also include upgrades to the connected locking devices.
For new construction, our custom panels allow the officer station to be developed alongside the doors, locking devices and communication equipment. Specifications and drawings support the discussion of panel layout and selected functions while the project is being designed. Project teams can work with Willo on both the new control panels and the locking equipment they will operate.
At the Jefferson County Downtown Jail in Beaumont, Texas, Willo’s retrofit work addressed 220 worn SS7100 sliding door devices. The retrofit replaced the operating mechanisms inside the existing overhead trackboxes, allowing those boxes to remain in place above the doors. The project also included renovation of the control boxes and new control panels.
Willo also helped the county develop bid documents so retrofit and complete replacement could both be considered. That gave the county a basis for comparing two approaches to the same equipment problem before the work was awarded.
Photo · [image needed]
Why hard-wired
Willo's hard-wired, relay-based panels keep every switch at the officer's fingertips, with no software updates or multiple screens to navigate. A single fault stays isolated instead of taking down the whole system, and in-house technicians can troubleshoot visually and replace commercially available parts.
Request a DemoFor architects & specifiers
Every door is different
See how Willo’s hardwired controls work and discuss the electronics needs of your facility. Request a security electronics demonstration to explore door controls, intercom options and support for the equipment your staff relies on.