willo logo largeDetention Equipment Systems & Controls | Since 1945
securitymesh

Convert Kitchen to Cells

Patented

"The Wedge" , the new Willo Surface Mounted Lock Pocket (Willo SMLP-1), takes away your broken minimum security locks and replaces them with a medium/maximum security lock system.

WedgeSurfaceLock

Benefits & Features:

  • MEETS ASTM F1450 Grade 1 Security Hollow Metal impact test
  • GRIPPER—PREVENTS “Sheeting”
  • PROTECTS the Lock Bolt from prisoner access
  • Officer on floor ALWAYS sees security status (Red/Green) of each door!
  • EXTREMELY HARD for the prisoner to pack debris in Strike/Receiver
  • REDUCES OWNER LIABILITY caused by inmate attacks
  • ADDS SECURITY to cell doors
  • REDUCES renovation time and cost

Options:

  • Highly visible, 30mm, Red/Green Door Indication LED (as shown in picture)
  • Integral Flush Pull
  • Concealed 201023, triple biased, Magnetic Door Position Switch
  • Electric Key Switch
  • Lighting Control Switch
  • High quality powder coat finish

From small single-opening windows to large multiple-piece window walls, we fabricate all sizes and shapes of hollow metal doors and windows in our Decatur facility. Our hollow metal doors and frames are fabricated in strict conformance to the latest HMMA 863 and ASTM F1450 and ASTM F1592 specifications. Testing is performed here in our facility and strictly observed and documented by Wyle Laboratories of Huntsville, AL, an ISO 9001 registered and certified testing company.

Quality is in the Details

Years of fine tuning the details through listening to our customer's demands and continuously improving our engineering and refining our manufacturing techniques have yielded exceptional product quality. Here are a few examples: (will use photos from the site) Photo Caption 1: All mortar boxes are fully caulked. Photo Caption 2: Fully encapsulated weld nuts at glass stop screws, all frames prepped for full grout. (View from top of frame into vertical mullion). Photo Caption 3: Single-piece door glass stops welded at the corners and shipped factory-attached to the door with temporary screws. Photo Caption 4: Factory drilled and tapped for surface-mounted closers.

For more information about our hollow metal products, please contact our detention equipment department by email at This email address is being protected from spambots. You need JavaScript enabled to view it. or by calling 256.353.7161.

We manufacture security exterior windows for use in jails, prisons, and detention centers. The exterior security windows are constructed with continuous welded joints that are ground flush and painted with a "cold galv paint".

Our windows are available with the following finish coat options:

  • Factory Applied Prime Paint
  • Factory Applied Baked on Finish Coat
  • Factory Applied Powder Coat Finish

The center mullion of the exterior security window may have a 7/8" tool resisting (T.R.) rib bar, if specified. Other custom modifications may be available based on your need. For more information about our exterior security windows, please contact our detention equipment department by email at This email address is being protected from spambots. You need JavaScript enabled to view it. or by calling 256.353.7161.

We manufacture heavy duty detention furniture for use in cells and day-rooms. This furniture is constructed from durable materials and is designed specifically for the detention industry. Our detention furniture can be finished with a powder coat electrostatic paint, if you need a durable finish that will last for many years.

Our products include:

  • Vent Grilles #W070
  • Wall Mounted Access Door #W120
  • Wall Mounted Bunk #W581
  • Floor Mounted Bunk #W583
  • Floor Mounted Double Bunk #W585
  • Rectangle Picnic Table #W600
  • Pedestal Picnic Table #W610
  • Individual Desk #W620
  • Institutional Desk #W650
  • Floor Mounted Bench #W661
  • Floor Mounted Stool #W670
  • Wall Mounted Stool #W672
  • Key Cabinet #W760
  • Pistol Locker #W770
  • One-Piece Stainless Steel Mirror #W862

For more information about our detention furniture, please contact our detention equipment department by email at This email address is being protected from spambots. You need JavaScript enabled to view it. or by calling 256.353.7161.

Our high security mesh partitions, doors, and ceilings provide a clear site line for observation of inmates while maintaining security. We fabricate high security mesh as doors, partitions at holding cells or at recreation areas, and for ceilings over outdoor recreation areas.

Our high security mesh is constructed with a 12 gauge frame with continuous welded joints. It has 3/8" diameter round rods woven 2" center to center. Every other rod is welded inside the frame.

Our high security mesh products are available in the following finishes:

  • Hot Dip Galvanized
  • Galvanneal
  • Prime Paint
  • Baked on Finish Coat
  • Powder Coat Finish

For more information about our high security mesh, please contact our detention equipment department by email at This email address is being protected from spambots. You need JavaScript enabled to view it. or by calling 256.353.7161.

More Articles ...